Water purification information

What are the reasons for the pollution of pure water equipment?

Views : 76346
Update time : 2021-11-24 14:29:34
There are several explanations for the pollution of pure water equipment: the pure water source of this equipment is the effluent of urban tap water after ultrafiltration. The water quality is ideal, but some fungi reproduce by spores. Although municipal tap water has been chlorinated and disinfected before ultrafiltration, some fungal spores may be in a state of suspended animation and enter reverse osmosis. Reducing agent is added to the reverse osmosis inlet pipe to remove residual chlorine in the water. There is no oxidizing bactericide in the pipeline from the reverse osmosis feed water pump to the reverse osmosis outlet water, which creates good living conditions for other microorganisms such as anaerobic fungi, so that they can multiply rapidly in these parts.

The front-mounted safety filter of the pure water equipment is the filtering equipment before reverse osmosis, with a filtering accuracy of only 5m, which has a strong ability to intercept pollutants. When the intercepted material gathers together, it becomes an ideal environment for microorganisms to multiply. Other similar equipment also has many cases where foreign matter inside the safety filter affects the pure water equipment. Fungi-like substances enter the reverse osmosis body with the influent, and multiply inside the reverse osmosis, which affects the operation of the equipment.

1. Location selection of pure water equipment: The water softener must be placed on a firm level ground, and the distance from the drain is good. The distance from the boiler and other heat sources must be greater than 3m, and it is also forbidden to approach acidic liquids or gases. If additional water treatment equipment is needed, place should be reserved.

2. Regarding the location of the recovery salt tank and resin:

It should be placed as close to the exchange column as possible. In order to make full use of the salt solution, try to shorten the size of the salt-absorbing plastic tube.

3. About filling quartz sand and resin:

(1) To ensure uniform water distribution, try to spread 150~200mm high-quality quartz sand on the bottom of the exchange column.

Then fill with resin and check the length and suitability of the intermediate riser.

 
Related News
Read More >>
RO membrane high-pressure membrane: a wide range of applications show strong adaptability RO membrane high-pressure membrane: a wide range of applications show strong adaptability
Oct .17.2024
Reverse Osmosis (RO) technology, as a key means of modern water resource treatment, plays an important role in global water resource management and protection with its efficient and precise separation characteristics. Among them, RO high-pressure membranes have demonstrated strong environmental adaptability and the ability to treat complex water quality due to their wide and unique range of applications. In this paper, we will discuss the advantages of RO high-pressure membrane in the scope of application and its practical significance.
Do you really understand the difference between high pressure reverse osmosis membranes and low pressure reverse osmosis membranes? Do you really understand the difference between high pressure reverse osmosis membranes and low pressure reverse osmosis membranes?
Oct .17.2024
We are going to talk about the difference between high pressure reverse osmosis membrane and low pressure reverse osmosis membrane. These two membranes have a wide range of applications in water purification, but it is important for the average consumer to understand the difference between them.
Water purifiers --Pure water equipment water rate reduction is what happened? Water purifiers --Pure water equipment water rate reduction is what happened?
Oct .16.2024
Pure water equipment is our commonly used water treatment equipment, people familiar with it know that pure water equipment in use for a period of time, there will be a reduction in the water rate of the problem, the face of this situation we have to do it, the following chat on this topic.